No Screws, No Hangers, No Problem: Why REVO Is the Public Land Bow Holder

Why a Bow Holder Belongs on Every Accessory-Port Stand

REVO is XOP's newest bow holder, and it's a direct answer to a request their audience has been making for a while: bring back a genuinely adjustable, tool-free bow holder. It mounts to the accessory ports already built into compatible XOP stands, including SWAY and the Fly, and the entire point is that adjustment happens without a multi-tool. Untwist it, move it into position, twist it back down, and it locks in.

That tool-free detail matters more than it sounds like on paper. Anyone who's climbed into a stand in the dark, realized the holder's angle is wrong, and then remembered their multi-tool is sitting in the truck knows exactly the moment REVO is built to eliminate. This is exactly the kind of small hang-up I laid out in Treestand Accessories: The Complete Guide to Upgrading Your Mobile Setup, the little frictions that pull your focus off the hunt and onto your gear at exactly the wrong moment.

 A tool-free, adjustable bow holder like XOP's REVO solves the recurring problem of fixed or missing bow holders, mounting to the accessory ports already built into compatible stands and allowing angle adjustment without a multi-tool. Unlike a screw-in hook or hanger, which many public land regulations prohibit as permanent tree damage, an integrated bow holder requires no penetration of the tree and stays fully compliant on public ground. It also folds flat for transport rather than swinging loosely, preventing the holder from snagging a bow during movement, and eliminates the risk of forgetting a separate piece of equipment altogether since it travels attached to the stand itself.

The Public Land Problem Nobody Talks About

Here's the piece that matters more than most hunters give it credit for. A lot of public ground, state forests, WMAs, national forest land, prohibits anything that penetrates or damages the tree, and that includes screw-in bow hooks and hangers. Some hunters don't find that out until a warden's standing at the base of their tree, and plenty more just never think about it because a screw-in hook feels like such a minor, normal piece of gear that it doesn't register as a violation.

An accessory-port bow holder sidesteps that entirely. REVO mounts to the port already built into the stand itself, no drilling, no screwing anything into bark, no permanent mark left on a tree that other hunters and the public land you're standing on have to live with after you've packed out. It's fully legal everywhere a screw-in hook isn't, and it removes the question altogether instead of making you double-check regulations county by county or property by property. If you hunt a mix of public and private ground through a season, that's one less thing to think about switching in and out depending on where you're set up that day.

The Gear You Forget Is the Gear That Costs You

There's a second, quieter problem a lot of hunters run into that REVO solves just by existing. A screw-in hook is a separate item. It lives in a pocket, a pack, a truck console, somewhere outside the stand itself, which means it's one more thing that has to make the trip with you every single time. Forget it once, and you're improvising, balancing a bow across your lap, leaning it against the tree trunk within reach but not quite secure, or hanging it on a branch that isn't rated to hold anything and definitely isn't where you actually want it positioned for a quiet, controlled draw.

Because REVO folds flat and travels attached to the stand, that failure point disappears. You don't pack it separately, so you can't leave it behind. It's there every time the stand is there, already positioned on the accessory port, ready to unfold and lock in the moment you're settled. That's not a small convenience. A missing bow holder is exactly the kind of gap that turns a clean, quiet setup into a fumbling one, and it's avoidable in a way a lot of gear failures simply aren't.

It also folds flat for transport instead of swinging loosely around the stand, which the team specifically called out as intentional, since a bow holder that swings freely is exactly the kind of thing that snags a bow at the worst possible moment, whether that's during the climb, the walk in, or a repositioning shift mid-sit.

Who Actually Needs One

Any hunter running an accessory-port stand who's currently either going without a bow holder or fighting a fixed, non-adjustable one. Public land hunters in particular should treat this less as an optional upgrade and more as the simplest way to stay compliant without having to think about it. It's a small piece of gear that removes a genuinely annoying recurring problem, and on shared ground, it removes a legal one too.

Pairs Well With

REVO pairs well with SWAY, where the larger platform gives you more room to position it exactly where you want it, and it's worth reading alongside the full 2026 product launch breakdown for the rest of what shipped alongside it. If you're building out your whole setup one deliberate piece at a time rather than accumulating gear at random, the accessories guide is the place to see how a bow holder like this one fits alongside pouches, tethers, aiders, and the rest of the system.